Example of a 10 stall barn

The owners built a metal barn with ten stalls, using our 2x6 tongue & groove Ponderosa Pine, all random length. This material is kiln dried with a V-edge pattern on one side. All boards are good two sides. Steel bars and door frames were purchased commercially.

Photo of stalls
The V-edge side of the board was used on the aisle side of the stalls. You can see a close-up of a corner below.

A completed door with steel frame and all hardware.

Photo of stall interior
This interior view of one stall shows the flat side of the boards.

Return to Barn & Stall Lumber page.